Keihin-type 26PWK carburetor
Flat-shaped slide
PowerJet additional concentrator
Hand choke
Main injector 110 M5 Keihin
Idle jet M6 Keihin
Air filter connection inner diameter 45 mm
Intake neck connection inner diameter 26 mm
Intake neck connection outer diameter 35 mm
Plastic suction neck fits 32-35 mm pipe
Plastic suction neck inner diameter 32-35 mm
Plastic suction neck length 30 mm
Overall dimensions 65 x 82 x 150 mm
Boost your engine and enjoy top-notch performance with the Mikuni-type 26PWK carburetor!
Carburetor adjustment in brief:
Nozzle size: A larger nozzle increases the amount of fuel. A smaller nozzle decreases it. Adjust as needed based on engine requirements.
Needle level: A higher needle level increases the fuel mixture. A lower level will have a leaner mixture. Adjust the needle level according to the engine's needs.
Air screw: Open the air screw clockwise if the mixture is too rich. Turn it counterclockwise if the mixture is too lean. Adjust until the engine runs smoothly. Remember that adjusting the carburetor requires care and experimentation. Small adjustment steps are safer than large changes.
